Excellent soldering iron CXG 936D from China

All these solders ended in a bunch of rosin smoke, burnt fingers and an unsoldered part. In those days, yes, probably even now, including in my garage, most of the soldering irons are soldering irons from the USSR with a nichrome spiral thread as a heating element. To be honest, these soldering irons are practically unkillable. They heat up for a very long time, but when they heat up, you can even fry potatoes in a pan. In Soviet models of soldering irons, there were a couple of, let's say, flaws, and this is the inability to regulate the temperature and there was no possibility of changing the tip.

Today, soldering irons with nichrome filament have replaced those from China with a ceramic heater. Built-in electronics allow temperature control. For home and garage, and this is soldering small parts, machine and home wiring, a soldering iron from China, discussed below, is quite suitable.

And so we meet a soldering iron from China, brand CXG 936d. The soldering iron has a small length of the heating element, which is much more convenient than domestic ones. The body is plastic. There is a digital indicator on the body that displays the temperature of the heating element. Two buttons, to the right and to the left of the indicator, allow you to adjust the temperature. The adjustment range is from 80 to 450 degrees. The power cord is neither thick nor thin, soft.

A stand for a soldering iron and a set of 10 tips with different types of tips are supplied with the soldering iron.

The quality of the sting nozzles at first glance did not inspire confidence in me, but for a short period of time of use, everything seems to be fine and work well. The solder lies flat, does not roll into the ball. And for those who are not satisfied with the tips that come with a soldering iron from China, you can order a soldering iron tip made of pure copper.

A soldering iron stand is not required, I do not use it. The balancing of the soldering iron is such that the tip does not outweigh or touch the table.

Now about the insides. The casing of the heating element, which also fixes the sting, is screwed to the main body with a bolt. This allows you to quickly change the tip depending on the need.

Heating element - ceramics. Electric power - 60W. There is a thermocouple at the end. A feature of this heating element is the speed of its warming up.

In case of failure, which is unlikely, you can order a replacement ceramic heating element. It is standard, it is not expensive.

Sentence:

Good qualities: fast heating, adjustment of the working temperature depending on on the quality of the solder and the amount of work, replacement of the tip-nozzle.
Disadvantages: the wire is not made of refractory material.

Everyone have a good day day , good and bubble . Successful and useful purchases .