Baby monitor from China

This device will untie the hands of young mothers and allow you to look after their babies, being with them in different rooms and on different floors.

If in my time there was an opportunity to purchase such a video baby monitor from China and such devices were cheaper, then there would be several times less problems with children. Remember sleepless nights, or when you are doing something and the child is in another room, you have only one thing in your head, but how is he there, whether he is crying, etc. With the advent of such video nurses from China, everything has become much easier and the young parents themselves in particular, mommy began to keep up with the housework and no matter how strange it was to have more rest.

So, having a baby monitor from China, we can conclude that seeing a child in a camera and hearing him is still better than running and checking him every 10-20 minutes.

Characteristics:

· Works at a frequency of 2.4 GHz;

· Communication up to 260 meters;

· Night vision mode (monitoring the child even in the dark);

· Automatic switching on in the presence of noise (VOX function);

· Long operating time (8 hours in VOX mode);

· Brightness control for adjusting the video image;

· Angle of rotation of the camera 360 degrees + tilts;

· Function of two-way communication (walkie-talkie);

· Monitoring the temperature in the room;

· Built-in lullabies.

Equipment:

Parent block

Camera

Two power supplies

Instruction

Power supplies with European plugs. The length of the cord is about 2 meters. miniUSB cord with connector. Each wire has a warning to be watched near the child! At the output, the power supply provides 5V and 550 mA. The weight of the parent unit with the battery is 82.4 grams, and the weight of the baby unit is 53.8 grams.

Children's block:

The baby unit can be tilted 250 degrees and rotated 360 degrees on its own axis. On the front there are IR LEDs, a camera peephole, a light sensor, a green LED for operating mode and a microphone at the bottom.

The temperature sensor is brought out from the back side. Almost the entire back of the speaker and just below the reset button - connecting the camera to the parent unit. On the top there is a small bracket for attaching or carrying. The baby unit can be fixed to the wall (the instructions contain the necessary markings for drilling holes). Rubber feet allow the unit to stand steadily.

Parent block

Stands firmly, even on uneven surfaces. The stand that supports the unit in an upright position hides flush with the body. On the right side there is a mini USB connector for charging the built-in 1200 mAH battery. The buttons are rubber, easy to press. There are two LEDs on the front. Red indicates that the nanny is on and working, and blue, that communication with the baby unit is established. The display with a resolution of 640 x 480 shows a fairly high-quality picture.

The upper part shows the signal level from the baby unit, the temperature near it and the remaining charge of the parent unit. The size of the parent unit is approximately 12 by 6 cm.

Functions:

When you hold down the button with the image of the note for a long time, children's lullaby melodies sound in an assortment of 8 pieces. The melodies will play until you stop them again with a long press. A note icon is displayed at the top.

When you press the central microphone button, the microphone is displayed on the display, and you can say a few words to your baby. The transmission quality is good.

Use the adjustment buttons to set the desired volume from 6 points. If two blocks are VERY close (up to 70 cm), an echo effect is formed. A light press on the button with the image of the note (the menu is also indicated there) and we get to the settings menu.

The first item in the menu is to reconfigure the camera connection. To do this, we reset the previous connection and then, by pressing the black micro button on the baby unit, we connect both blocks.

The settings have five independent alarms with different settings, both in time and in frequency. A very useful function when the baby needed to be fed on time.

There is a choice of language, setting the time and date. You can specify in which format to display the temperature, it is possible to set the frequency, in case the camera transmits images with interference (stripes).

The parent unit can always be with the screen on (it is convenient when the outlet is nearby), or it can go into VOX mode, such as the sleep mode on the phone. But if suddenly there is some kind of noise, crying or sneezing in the area of ​​the children's block, the camera will immediately turn on in operating mode. Helps save battery.

When you turn off the light in the room, the camera automatically switches to night mode. And at the nursery unit, the IR illumination turns on in a circle. The backlight is quite bright, within 2 meters you can see all the objects and the child.

Sentence:

Inexpensive video nanny from China with a large coverage area, high-quality night shooting, responds perfectly to external sounds in VOX mode. A large selection of built-in lullabies, a thermometer and an alarm clock.

Have a nice day everyone, kindness and money. Happy and useful shopping.

Go to the store